Model: LLN-5 

Description

This sample forming machine is suitable to make hot-mix asphalt mixture specimen, the sample can be used for rutting test, bending test, tensile test, strain test. the rutting test specimen made can meet the EN or GB standards.

Features

Safe and reliable featured Mitsubishi PLC as the core control system can guarantee superior work performance even under complicated condition

High definition featured Mitsubishi touch screen as the Human-machine interface(HMI), easy operation, real time working process indicating

Panasonic inverter adopted with freely adjusted vibration frequency within 0-50Hz

Sector shapen steel rolling wheel

One time automatic specimen formed only by preset height and density

Compaction times settable under each pressure through PLC, the working process sequence is P1,P2,P3,P4

Compaction load can be regulated through the four knobs

If any of the three Safety protection door opened, machine will cut off air source and electricity to stop machine to guarantee operator’s life safety

Easy mould plug-in and take out

Technical specification

Total power	1000W
Power supply	AC 220V±10%, 50/60HZ
Max wheel rolling load	55KN
Rolling travel	±150mm
Rolling speed	Adjustable, Max. 10times/min
Specimen plate thickness	40~120mm（adjustable）
Vibration frequency	0~50Hz (adjustable)
Compressed air	0.6~0.8MPa,700L/Min
Mould size(mm)	300×300,300×400,305×300,305×400(Optional)
Overall dimension	1780×950×1550 mm(L*W*H)
Net weight	EST. 750Kg

Have any question, Please enter the form below and click the submit button.

*

*

2 + 5 = ? Please enter the answer to the sum & Click Submit to verify your registration.