Civil engineering & Material Testing equipments

Monthly Archives: May 2018

Home » Tags »

Model: WNE-1B Standards: ASTM D1665, GB/T266, JTG E20-11 T0622 This Engler can be used to determine the viscosity of bitumen and petroleum products. Features Bench type, integration structure, the inner and outer pan are both made of stainless steel, special …

Model: WNE-1A Standards: GB/T266, JTG E20-11 T0622, ASTM D1655 This Engler viscometer is used to determine the specific viscosity of tars and their products according to the ASTM D1655 standards, the viscometer is comprised of stirrer and thermometer, bench type, …

Model: UTM-1200D Description This model UTM is powered by hydraulic, it’s mainly used for mechanical testing of metal and nonmetal material under normal temperature condition. It mainly can perform tensile, compression, bending, shear tests. Controlled by servo system to enable …

    Standards: BS 1377:2, ASTM D4318 Description The liquid plastic limit test set is used to determine the limit water content of soil. The complete set including below: Porcelain mixing dish dia. approx 120mm, measuring cydlinder 25ml, square glass plate 300*300mm, spatula with …

Model: TSH-1 The soil wetting test apparatus is used to determine the disintegration speed of structed cohesive soil submerged in water. It’s a common soil test equipment. The apparatus is comprised of a metal grid, 1pc organic glass cylinder, 1pc buoyance …

Model: MLS It’s a portable anchor bolt pull out tester which can be used to test the anchoring strength of anchoring rods, steel rod, expansion bolts and other anchoring device. Features LCD display with backlight Peak maintain Can store up …

Model:ETTC-10S Standards ISO4624, ASTM D4541, ASTM D7234 GB5210-1985-T《 the adhesion test method of coatings-pull off method》 GB16777-2008 《 the testing method of Building waterproof coating》 GB/T5210-2006《 the adhesion test of paint and varnish-pull off method》; The coating adhesion tester is …

  ISO 3310-1 sieves, woven cloth sieves Nominal aperture   200 mm dia  250 mm dia.  300 mm dia.  315 mm dia.  450 mm dia. 20 µm 38 µm 40 µm 45 µm 50 µm 53 µm 63 µm 75 µm 80 …

Standards: BS 812-105.2 The Flakiness Length Gauge is used for determining the elongation index of aggregates. The particle is elongated when its length is more than 1.8 to the midsize of the sieve fraction. The aggregate to be classified is separated into six sieve fractions from 6.3 …

Model: DCP-TRL Standards: ASTM D6591 The DCP Dynamic Cone Penetration test has good relations with CBR and resilience modulus, thus can be used to evaluate the roadbase strength. Features quick, easy to operate, no limited to filed conditions. The DCP …

Standards: BS EN 12600 Model: JC-EN 12600 This equipment is used to test the impact strength of building glass material under EN 12600 standard, dual tyre type impactor body,  adjustable drop height, controlled test. Technical specifications Impactor height 190,450,1200mm Impactor …

Standards: GB/T4340.2, ISO6507-2, ASTM E384 Model: HVSZ-1000(Automatic measurement system) General description This hardness tester integrates durometer and computer automatic measurement system together via CCD camera, the whole test procedure can be done through keyboard and mouse operation, easy and high …

Verified by MonsterInsights