Description The X Ray flaw detector uses the penetration and attenuation characteristics of X ray thus to detect the flaw of different objects, it can detect metal and nonmetal materials, it mainly detects the volume defects such as stomata, …

Description The round sample cutter is suitable to cut sample out of from the wool, cotton, chemical fiber, knit and other fabrics. Technical specifications Sampling area 100cm2 100cm2 11.3cm2 154cm2 sampling dia. Φ112.8mm Φ112.8mm Φ38 mm Φ140 mm cut thickness …

  Model: ETM-H Technical specifications Total test accuracy 1% Max. test load  300kN  Load range 0.4%-100% Accuracy ±1% resolution 1/200000F.S Deformation extensometer range 50mm Max. range 10mm Test range 2%-100% Relative Accuracy ±1% Displacement Relative accuracy ±1% resolution 0.001mm Speed …

  Standards: CTM-300S Standards: GB/T17671-1999, ISO 679:1989 Application Cement mortar flexure strength test, compression test Features Double test space, space saving, Computer control, easy in operation, automatic test Technical specifications Max. test Load 300KN/10kN Load relative error ≤±1% Load rate 0.3KN/S～10KN/S（comression） …

Standards:GB/T17671-1999, ISO 679:1989 Model: CTM-300H Application Cement mortar compression test, concrete compression test, brick compression test Features PLC+ Computer control, 80% less fault rate Servo motor adapted, much less stuck fault caused by oil impurity Technical specifications Max. Load 300kN Load …

  Features Servo motor driven Can do stretch, compression, bending, shear test Low noise, high efficiency Can test metal, nonmetal, composite material Automatic obtain of stretch strength, bending strength, yielding strength, elongation rate, elastic modulus, peel strength Close-loop control, automatic …

Standards: GB, ISO, ASTM, DIN Features Electric system: AC servo driver, AC servo motor, overcurrent, overvoltage, overspeed, overload protection device; speed ratio to 1:100000 Upper lower limit, emergency stop function available Test modes available: constant speed loading, constant speed move, …

Standards: JJG817-93 Introduction This calibrator is specialized device for calibration of test hammer. Main technical specifications Anvil hardness: HRC60±2 Pointer length: 27.5±0.1 Force power weights: 2kg±1g It’s composed of base, calibration anvil, positioning plate, rebound handle, calibration frame, positioning plate, vernier, …

  Model: HT-1000JD Introduction It’s the specialized calibration device for concrete test hammer This anvil is made of quality steel and tool steel, the fitting surface between anvil core and body is treated with fine grinding process, the anvil core …

Model:HT-225JD Introduction The Steel calibration anvils is the specialized calibration device for concrete test hammer. This anvil is made of quality steel and tool steel, the fitting surface between anvil core and body is treated with fine grinding process, the …

      Standards: JTGE60-2008  Model: LHT-2 Introduction This tester is used to test the soil base resilience deformation value under each loading degree, thus to calculate the soil base resilience modulus. It’s kind of common soil and road testing instrument. Main …

UTM-D Servo Electro-hydraulic Universal Testing Machine catalog