Description This apparatus is used to determine mud hydrometer either at Oilfield or laboratory. Technical specifications 1.Testing range: 0.96~3g/cm3  2. Testing accuracy: 0.01g/cm3 3. Mud cup capacity: 140cm3 4.Apparatus size: 500×100×100mm(L*W*H)

Description The sand replacement apparatus is used to test the density of sandy soil, gravel soil, sand-gravel material, graded gravel, cement stabilized soil, limestone stabilized soil, the above aggregate maximum diameter can’t over than 25mm. the tested layer thickness should …

Description This Sand cone density apparatus is used to determine the density of fine grained soil, sandy soil, gravel soil at site by sand cone method, the max grain size can’t over than 15mm. the testing thickness is 150-200mm, it …

Description The slump cone test set is mainly used to determine the slump value of fresh concrete mixture in situ or laboratory. It also can be used for testing the specific gravity of fine aggregates. The complete set comprised of …

Specifications Capacity: 2610g Accuracy: 10mg  

  Standard: BS 812-105.1 The flakiness thickness gauge is used to determine if the aggregate particles are to be considered as flaky. The aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm. the gauge is made from 1.5mm thickness …

Model: WKY-1 1. Application The standard Vicat apparatus  is used to test the water consumption needs for standard cement consistence and the setting time. 2. Specification Sliding part weight: 300±1g Sliding part max travel:70mm Consistence test rod diameter: φ10±0.05mm Test …

Description The angularity test apparatus is used to evaluate the fine aggregate surface roughness and structure, thus to access their applicability for asphalt mixture. The angularity test apparatus upper part is a cylindrical volumetric flask made of metal or plastic, …

  Model: PAV-1 Standards: ASTM D6521, AASHTO PPI Description This equipment is designed and manufactured by complies to the ASTM D6521, AASHTO PPI standards, it’s professional equipment to access the asphalt aging characteristics under natural condition. Features It’s comprised of asphalt pressure aging test …

Model: LY-0754 Description This tester is used to determine the bond strength between emulsified asphalt and aggregates. Main features 1. Bench type structure, innovative design, easy in use. 2. Easy to carry, can be used indoor or in field. Main specifications …

Model: GZS-1 Description The high frequency sieve shaker is mainly used to perform grading analysis of soil and aggregate. It’s of table type and high frequency vibration structure. It features compact in structure, light-in-weight, low noise, low power-consumption. It’s suitable for …

Model: HHS-1 Description The Trichloroethylene recycling apparatus is used to recycle polluted combustible solvent, it can also recycle Benzene by working with the asphalt mixture extractor. Technical specifications 1.Temperature control range: 50 ~ 200 °C 2. Power supply: AC 220V, …