Model: SDL-2 Standards: EN 933-8 | ASTM D2419 | AASHTO T176 Description The sand equivalent test set is used to test the fine aggregate purity degree by testing the cohesive soil and impurity content. It’s suitable to test the asphalt …

   Standards: JTJ053-94, GB/T50080-2002, ASTM C231 Model: HQ-7 Description This apparatus is suitable to test the air entrainment of concrete mixture, the aggregate  grain size should less than 31.5mm, and air content should no over than 10%, also with slumps. …

Model: LY-0752 Description This tester is used to determine the abrasion property of emulsified asphalt slurry seal mixture, thus to determine the best asphalt content in slurry seal mixture. It complies to the JTJ052 standards. It’s kind of vey common asphalt …

Model: HZT-1 Description The vibrating table machine is used to form concrete specimens in lab, it’s comprised of base support, vibrator, four springs, the table and base are made of steel plate and structural steel, the vibration table is driven …

Model: YNB-1 Description The slake-durability test apparatus is used to test the rock disintegration index in laboratory, mainly for the clay rocks and decayed rocks. It’s kind of very common rock testing instrument. Technical specification 1. Main power: 90W 2. …

Model: PZ-40 Description This tester is used to perform swelling pressure test for rock under constant volume, it’s equipped with permeability board. It’s kind of common rock testing instrument. Technical specifications 1. Max testing power: 40KN 2. Precision: 1% 3. …

   Triaxial testing accessories as below:                            Saturator                   Compactor              Membrane tube                                 Soil Cutter                     Pressure cell                Split Mould

Model: HT-225W Description The concrete test Hammer is mainly used for concrete strength test thus to know the construction structure quality,  digital directly indication, automatic calculation, easy operation, direct in results. Features Integrated design, combine the Schmidt hammer and the …

Model: SJJ-15 Description This mixer is used to mix wall-facing material, cement mortar, and many other powder material in laboratory. Technical specifications Stirring vane rotation speed (clockwise): 80±4r/min Stirring barrel rotation speed (anticlockwise): 60±2r/min Stirring barrel volume: 15L Stirring barrel …

  Description The Heavy duty Schmidt Hammer is used to inspect the large/heavy component part strength in many area, like water irrigation, port, railway tunnel, mineral, road, airport runway, foundation beam. It complies to the GB/T9138-1988 standards. Features The centre …

Description The Concrete Cutting machine  is used to do specimen cutting work in civil engineering inspection area, also it can be used to cut the special-shaped brick. Technical specifications 1. Allowed specimen diameter: 50, 75, 100mm 2. Specimen length: 47.5-205mm …

Description The vacuum drying oven is suitable for drying, sterilization, heating process in laboratory. It is specially designed for materials which is heat sensitive, easy to resolve, easy to oxidize, inert gases can be filled in, some complicated materials also …