Model: HYH-84 Description This tank is used for fast curing of concrete specimen, it can test the compression and anti-flex characteristics of the specimen of its next 3/7/24 days within 24hours. Thus greatly shorten the cement inspection period. Technical …

 Model: SQM-500 Description  This mill is used to grind the cement clinker, it’s an indispensable equipment in cement factory to test the cement clinker physical strength and chemical characteristics, also it can be used to grind other materials. It posses …

  Description (1). Heating process and industry work piece processing for cement, construction material industry. (2). Pharmaceuticals industry for medicine inspection, pre-treatment on medicine sample (3). Analytical chemical industry: used in water analysis, environmental analysis for sample treatment. Also can …

Model: YDZ-100  Description The point load test apparatus is used to test the rock tensile and compression strength, it has no special requirements for the testing-sample, it features compact in size, light in weight, good mobility, and easy in operation, …

Model: K-30 Description The plate load tester is used to determine the “K” value of road, railway road base, soil foundation. Technical specification Jack stroke: 0-120mm, loading range: 0-6T Pressure testing range: 0-20Mpa Displacement testing range:0-10mm, testing span: 3000mm Working …

Direct Shear Test Updated 10 September 2010 Concept The Direct Shear Test is used for determination of the consolidated drained (or undrained) shear strength of soils. The test is performed by deforming a specimen at a controlled rate on or …

Why should you have your floors Pendulum Tested? Are you an Employer, Owner or Manager?   BY LAW  you are mandated to ensure floors Are Safe From Slips AT ALL TIMES and failure to prevent floor slips, slip injuries and …

Model:  YTM-125 Description The sample extruder is used for demoulding of specimen, it generally work with the multifunctional electric compactor and Marshall electric compactor. It’s suitable for the mould with diameter of φ100mm, 152mm and 170mm. Technical specifications Max demould …

Standards: JTJ051-93, GB/T 50123-1999 Model: TZJ-3 Description The direct shear test machine is used to test the soil shear strength, it has two and three speed steps. The specimens are tested under different vertical pressure and applied shear force, thus …

Model: LD-50 Description The Le Chatelier mould is used to check the Le Chatelier clamp quality, also used to test the pointers distance to check the cement stability. Technical specifications Special weights weight: 300g Scale plate minimum distance: 0.5mm Net …

Model: JJ-5 Description This mortar mixer is used to mix cement mortar in laboratory, to make specimen for testing using, it’s kind of very common cement testing instrument. Technical specifications 1. Power supply: AC 380V/220V, 50HZ, 2. Motor power: 370W 3. …

  Model:SFZ-31A Description The Le Chatelier water bath is designed and made according to the GB/T1346 and JC/T955-2005 standards. It’s mainly used to test the cement stability by Le Chatelier method and pat test method. Automatic / manual control on …